河南郑州数控车床加工，郑州cnc数控车床加工，精密数控车床加工需要注意的5大事项：
一、合理选择刀具、郑州cnc数控车床加工
1、粗车时，要选强度高、耐用度好的刀具，以便满足粗车时大背吃刀量、大进给量的要求。
2、精车时，要选精度高、耐用度好的刀具，以保证加工精度的要求。
3、为减少换刀时间和方便对刀，应尽量采用机夹刀和机夹刀片。
二、合理选择夹具、郑州cnc数控车床加工
1、尽量选用通用夹具装夹工件，避免采用专用夹具;
2、零件定位基准重合，以减少定位误差。
三、确定加工路线、郑州cnc数控车床加工
加工路线是指精密数控车床、cnc数控车床加工过程中，刀具相对零件的运动轨迹和方向。
1、应能保证加工精度和表面粗糙要求;
2、应尽量缩短加工路线，减少刀具空行程时间。
四、加工路线与加工余量、郑州cnc数控车床加工
cnc数控车床加工还未达到普及使用的条件下，一般应把毛坯上过多的余量，特别是含有锻、铸硬皮层的余量安排在普通车床上加工。如必须用数控车床加工时，则需注意程序的灵活安排。
五、夹具安装要点、郑州cnc数控车床加工
目前液压卡盘和液压夹紧油缸的连接是靠拉杆实现的，液压卡盘夹紧要点如下：首先用搬手卸下液压油缸上的螺帽，卸下拉管，并从主轴后端抽出，再用搬手卸下卡盘固定螺钉，即可卸下卡盘。
郑州cnc数控车床加工厂家（豫盛五金机械）为您介绍的以上有关精密数控车床、cnc数控车床加工的五个注意事项，希望对大家有帮助。
there are five items to be noticed in henan zhengzhou cnc lathe processing, zhengzhou cnc lathe processing and precision cnc lathe processing:
1、 reasonable selection of cutting tools and machining with zhengzhou cnc lathe
1. during rough turning, the cutter with high strength and good durability shall be selected to meet the requirements of large back draft and large feed during rough turning.
2. when finishing, the cutting tools with high accuracy and good durability shall be selected to ensure the requirements of machining accuracy.
3. in order to reduce the time of tool change and facilitate tool setting, it is necessary to use the machine clamping knife and the machine clamping knife as much as possible.
2、 reasonable selection of fixture and cnc lathe processing in zhengzhou
1. try to use general fixture to clamp workpiece, avoid using special fixture;
2. the part positioning datum coincides to reduce the positioning error.
3、 determine the processing route, zhengzhou cnc lathe processing
the machining route refers to the movement track and direction of the cutter relative to the part in the process of machining precision cnc lathe and cnc lathe.
1. it shall be able to meet the requirements of machining accuracy and surface roughness;
2. the machining route should be shortened as much as possible to reduce the time of tool empty travel.
4、 machining route and machining allowance, zhengzhou cnc lathe machining
under the condition that cnc lathe has not been widely used, it is generally necessary to arrange too much allowance on the blank, especially the allowance containing forging and casting hard skin layer on the general lathe. if it is necessary to use cnc lathe for machining, it is necessary to pay attention to the flexible arrangement of the program.
5、 key points of fixture installation and machining of zhengzhou cnc lathe
at present, the connection between the hydraulic chuck and the hydraulic clamping cylinder is realized by the pull rod. the key points of the hydraulic chuck clamping are as follows: first, remove the nut on the hydraulic cylinder by the hand, remove the pull tube, and pull it out from the rear end of the main shaft, then remove the fixed screw of the chuck by the hand, and then remove the chuck.
zhengzhou cnc lathe processing factory (yusheng hardware machinery) introduces the above five precautions for precision cnc lathe and cnc cnc lathe processing, hoping to help you.
关于豫盛：
郑州豫盛五金机械有限公司是一家专业从事设计，加工，销售为一体的精密机械加工的厂家，主要加工：非标零件切削加工，以精密五金零件，不锈钢零件加工，机械配件加工，模具设计加工等为主。产品广泛应用于家用电器、仪器仪表、通讯、航空航天、计算机，机械设备，汽车配件等各领域。原材料有不锈钢、铁、铜、铝等。
公司技术力量雄厚，现有先进的加工中心，数控铣床，精密自动车床，车铣复合走心机，冲床磨床等其它配套生产设备，相应检测配套齐全。凭借丰富的专业经验及科技实力，我们不断创新，从产品设计到零件制作均精益求精，为用户提供性能卓越的产品。亦可按客户要求承接来料加工，中小批量零件加工，设计制造及来图，来样定做。欢迎新老客户前来洽谈业务。
经营宗旨：品质高、价格优、交期短、服务好。
可根据客户图纸要求的零件大小、厚度、加工内容和要求工艺的不同，提供各种。
查看其它相同标签的文章：车床数控
15515954561
qq: 249039724
